Heating

dogwalker009's picture

A chum of mine has one of these park homes and although it is all well insulated even he said it is taking some keeping warm in this cold weather.

He told me he has gas heating and part of it is electric. He said to me that the price of gas was damn costly as well and that he had seen the heating oil post on the forum or more to the point after he had seen it via my laptop.

I did say that would it not take a lot more to heat a park home up and he said no not really it is just that it has been really cold and the only difference is that the price of gas is a killer and the electric so it looks like we are all feeling the cold a bit more this year.

So it just goes to show that no matter what type of property you have if it is blooming cold then you are going to have to really pay to heat it or stay cold.

letthestressbegin2010's picture

It has been rather cold this winter. The price of logs is crazy as well as electric and gas. I have a gas fire, two convector heaters and an oil filled heater to try and keep my place warm.

I have even gone as far as putting them on plug in timers so when I come in there is a bit of warmth otherwise the place is so called and takes so long to get warmed up.

On the subject of park homes I spoke to someone last year and they said that they had one large gas bottle and that lasted months it did in keeping theres warm so like the above says if it is normal cold then it is not so bad but when it has been as cold as it has just lately then we are all going to feel it even more.

Mark

View answers to similar questions

This content is aggregated from other web sites. Please see our terms of use.
  • When laying underfloor heating in a bathroom, is it possible to leave?

    the element covered for a few days before tiling the floor. The engineer wants to lay the heating, but my husband is unable to lay the tiles for two days.

    What advice can you give me please. Such as is it okay to lay cardboard over the top of the heating until ready for tiling.
    it shoud be ok if your very careful, if not use self leveling compound over the top of it, this will also give you a better surface to tile onto and you wont ruin the elements when laying the tiles

    good luck.
  • What is the cheapest way of heating my outdoor pool?

    I have an outdoor pool but my dad wants ME to find the cheapest heating. Now i'm thinking in the long-run this would be solar panel heating. Also this would be Eco friendly. However is there a way I can get it to heat in the winter too? Or is there a cheaper option?
    Oh yeah and where would the best place to get solar panel heating be?
    Ooops sorry I live in UK.
    If you live in or close to the country side then think about straw burning boiler My friend has had one for twenty years and his pool is always at 70° F summer and winter, very little ash from a bale of straw, and all it cost him is about £100 a year.
  • What is the best heating when all you have is storage heating and a panel heater?

    I have a storage heater in my living room and a storage heater in my hall. In the bedroom I have a anel heater. I have an oil filled small radiator which really isn't that sufficiant for the size of the living room and bedroom. Was wondering if there are cheaper ways of heating up a flat? Such as a large oil filled radiator on a timer or a convector heater on a timer. Anything has got to be much better then storage heaters.
    It might be better to try and cut down the heat you lose through windows and gaps under doors and the like. It'll be cheaper than adding another heater. If you want to add another heater then go for the oil filled radiator as you can move that to where it's needed.
  • Any idea why the boiler wont start up for the heating but will for the hot water? Boiler is a baxi solo?

    Both water and heating are controlled by an electronic timer in the airing cupboard. When the heating was set on the timer to come on, it didn't, so we moved the heating setting to continuous and tried again, no joy. We checked the thermostat was passed the click setting but that made no difference either. We've even tried to get it to come on whilst the water is on, so that the boiler is already running, but still no heat from the radiators. Any suggestions?
    Also, if the wiring and thermostat check out, I'd check the circulator pump. If that's not moving water, you won't get heat, but you'd still get hot water at the faucets.
  • What is the most efficient way to run central heating?

    Does it work out cheaper to have the central heating 'on' all the time and keep a constant heat or is it best to have it on timer and heat the place up from cold twice a day? Same goes for the hot water tank I guess..
    Depends.... on the size of your house, how much insulation and what sort of boiler and central heating system ect.

    Keep it on the timer and have it coming on 3 times a day when it's mild wintry weather.
    Typical settings I set mine to are:
    0700-800
    1000-1400
    1545-2300

    When it gets REALLY COLD (3 deg - minus whatever), run it continuously! Keep your doors shut (inner and outer doors) to keep heat in the rooms. Fit thermostatic radiator valves, and if possible have your boiler serviced regularly. Fit a combi-boiler if possible if you haven't already got one and you'll save loads - combi boilers use about half the energy of old condenser type boilers.

    Also, if you can, run it at exactly 20 deg C. DON'T touch that stat - leave it alone. Digital stats are much better and more accurate, fit one if you haven't got on and that might save you a bit as well.


    Good luck.
  • How much does a typical central heating system cost for a 3 bedroom terraced house?

    I am looking to get on the property ladder and have found a 3 bedroom, victorian terraced house within my price range. The problem is, it doesn't have central heating. Does anyone know the rough cost of implementing a central heating system in this size house?
    3 to 4 grand.
  • What would you advise to use to heat up my flat without central heating?

    My flat has no central heating, i am currently using small fan heaters but they are expensive to run and as soon as they get turned off it goes cold. I need something with a timer so my room will be warm in the morning. I also would like something a bit more economical. Should i get a convector or an oil filled radiator, or slimline panel?

    Any advice would be much appreciated.

    Thanks
    You can get timers that plug in to your electrical sockets and then you plug your heater into the timer.
    Oil-filled heaters may keep the heat longer. There are also ceramic heaters that are more efficient.
    Make quilted curtains for your windows to keep heat in at night. If it is really cold outside you may want to cover your windows with plastic taped at the edges to the window frame.
    Seal drafty cracks and behind electrical outlets with a non-toxic foam..
    Use an elecric blanket or heat pad at night - a hot water bottle is good too.
  • How to define heating demand pattern of a district?

    Hi,
    I want to make a dynamic simulation of a district heating system. So for this dynamic simulation I need to find demand pattern of the houses in the district.

    Would you please guide me how to create heating demand pattern for the houses which connected to district heating system? Any mathematical formulation, any article/book etc. are welcome for suggestion!

    Thank you.
    You would likely need to place real time metering in a statistical significant sample of homes over the cold months to get a realistic answer. The demand will be highly dependent on the outdoor temperature, and would likley be somewhat proportional. If you have access to historical weather and temperature data for the local area (local airport or Gov't weather data) , that would be a big plus, as heating demand would follow that graph of historic temperatures

    This may help as well:
    http://www.naun.org/journals/m3as/19-410.pdf
  • How many watts should my heating lamp be for my ball python?

    Im planning on getting a baby ball python an placing it in a 10 gallon tank until it gets bigger, and i need to know how many watts a heating lamp for it should be.
    i would recommend a ceramic 60 watt bulb
  • How long does underfloor heating (water) take to heat up? Is it much slower than normal radiators?

    We go out quite a bit so need heating that can warm up rooms in half an hour. We are worried that underfloor heating isn't sufficient and that we would need radiators or extra heaters in addition.
    From cold !? It depends how thick the slab is. I would say between 2 and 4 hours. However with this type of heating you don't want to use an on/off timer/programmer, but an optimising controller such as a Honeywell CM67 or Danfoss TP5000 this will calculate the optimum start up time depending on your preferred time and temperature settings, and will keep a small amount of heat in the floor at all times, ensuring a fast rise to preferred settings when the need arises. If you 'go out quite a bit' a couple of button presses will set the system back temporalily to a lower temperature untill you return.